- Car Wrap FAQ
- If the car body is scratched, can the car vinyl wrap be wrapped?
After a vehicle accident, scratches on the exterior caused sheet metal dents and car paint was broken, resulting in uneven surfaces. At this time, it is naturally impossible to achieve smooth construction by wrapping car vinyl wrap. Therefore, car owners who want to apply a car vinyl wrap need to check whether there is any dent before repairing the wrap. If there is an obvious dent, you need to go to auto repair shop to do sheet metal repair first, and then go to a wrap shop to repair the vinyl wrap.
If you don’t want to repair the dent and wrap it directly, it will affect the effect of the wrap in the later stage. It depends on whether you can accept it. Some car owners directly repair the sheet metal surface and wrap the film to save money on touch-up paint, which happens to be a good way to save money by refurbishing the car as well!
- Will the paint come off when the car vinyl wrap is removed?
It depends on whether you have touched up the paint or not. The original car paint removal wrap will not peel off the paint, because the original paint is sprayed by large-scale equipment, cured at high temperature, and the stability of the adhesion between the paint and the car body is very high.
However, even if the touch-up paint after manual painting is the same paint, the difference between manual spraying methods and large-scale production equipment is obvious, and the risk of tearing off the paint is greater.
- Will the car vinyl wrap produce air bubbles and the edge will fall off when the car is heated and washed?
It is a normal phenomenon to have individual small bubbles or flash within one week after construction. You can return to the shop in time to deal with it. After the treatment is completed, there is a high probability that this situation will not occur later. However, under normal circumstances, after the construction is completed, it is best to stay quietly for 2 hours in a cool place to make the film and the car surface more firmly.
- Will the car vinyl wrap reduce the heat dissipation of the car?
After the engine hood is covered with wrap, the impact on heat dissipation is very small and can be ignored. Therefore, there is no need to worry about reducing the heat dissipation after wrapping the car vinyl wrap.
- Can it be polished and waxed after the film is wrapped?
Can be treated like normal car paint. It can be waxed, but polishing is not recommended, so as not to damage the texture of the wrap surface due to improper operation.
- Is the matte vinyl wrap more likely to attract dust?
The dark color just appears to be more dusty than the light color, but it doesn't attract dust in particular. After there is dust, it is recommended to wipe it with a dry towel. It is best to clean it with a wrap surface cleaner. The attention should be light, and polishing and beauty is not allowed.
Pay special attention to the wrap of cream light color series, do not touch the car with dirty hands directly, the hands will produce sweat, which will make the wrap surface more dirty. (It is recommended to clean the wrap surface once every 3 months, which will protect the texture of the wraps).
0 Comments